Model No.: 800series
There are two types of double screw pump, which are sealed and not sealed, and the twin screw is divided into two types: double suction type and single suction type, according to the medium from one end or from both ends.
Twin screw pump, screw pump meshing, which uses mutual engagement, do not touch the two screws for pumping liquid.
The twin screw pump is a double suction non closed double screw pump. One end of the active screw extending from the pump is driven by a prime mover. The active screw and driven screw have different screw threads. The screw and the pump body are closely fitted. Driven screw is driven by active screw through synchronous gear.
The pump adopts a double suction structure, and the two ends of the screw are in the same pressure chamber, and the axial force can be self balanced. The bearings at the two ends are externally installed and lubricated by grease (grease) separately, thus being free from the influence of the conveying medium. The two screw is driven by a pair of synchronous gears, and there is no contact between the teeth of the screw, but there is a small gap, and the impurities in the medium can not produce direct wear on the tooth surface of the screw (except for the scour). In addition to some small displacement pumps (below 2W.W4.0), generally with the pump body with a flow type safety valve, when the discharge pressure exceeds the rated value, there is a certain protective effect. There are two kinds of inlet and outlet directions on the pump body, one is horizontal and horizontal, the other is horizontal and vertical, and users can choose according to their own needs.
1. The conveying liquid is stable, no pulsation, no agitation, little vibration and low noise.
2, self-priming performance is very strong, multiphase, gas rate is not higher than 80%, the sediment concentration is less than 500g/m3.
3, the external bearing structure, the use of independent lubrication, can transport all kinds of non lubricating media.
4, the use of synchronous gear drive, the two rotor contact, even if a short time idle.
5. The pump body has a heating sleeve, which can convey various low viscosity or high viscosity media with clean or solid small particles (the diameter of the particles is less than 0.12-0.2mm).
6, the correct selection of materials, and even transport a lot of corrosive media.
7, double suction structure, there is no axial force on the rotor.
8. Shaft ends adopt mechanical seals or bellows mechanical seals. They have long service life, less leakage and wide application scope.
Tianjin RongHeng Group LLC
Tianjin RongHeng Group LLC is a to-be-listed company specialized in petroleum drilling and exploitation device manufacturing. The Group was founded in 1982, restructured to limited liability company in 1999, named [Tianjin Hi-tech Enterprise" by Tianjin Municipal Government in 2008 and listed as [Tianjin Sci-tech Little Giant Enterprise" by Tianjin Municipal Government in 2011. Its registered place is North of Jinyu Road, Ninghe County, Tianjin and registered capital is RMB 63.58 million. In possession of petroleum drilling and exploitation equipment, precision foundry, mechanical processing and other advanced production assembly lines and inspection devices of globally advanced level, staples of the Group include electric petroleum-submersed pumps, electric petroleum-submersed motors, boost water injection pumps, double screw pumps, single screw pumps, reciprocal plunger pumps, impellers guide shells for pump and other advanced precision Castings. Its products cover all the major oilfields nationwide, which are sold to US, Germany, Russia, Canada, Japan, Singapore and Indonesia etc., playing the decisive role in domestic and foreign oilfield-supporting enterprises.In 2013, the company invested 600 million yuan, and built a high standard, high - tech and high - level modern industrial science and technology park with an area of 340 thousand square meters and 200 thousand square meters of factory building. There are 20 processing lines for automatic CNC machine tools, 500 sets of CNC machine tools, processing centers and special equipment, 2108 sets of inspection instruments and 36 sets of large testing equipment.
At present, the company has the annual production capacity of 5000 units (sets) of submersible pump units and 8000 tons of electric pump accessories.
It has 85 national patents, including 5 invention patents and 1 invention patents in the United States.
The ERP production management system and the product testing test-bed that meet the national standards and the relevant API recommendation standards have been established.
- Company Name: Tianjin RongHeng Group LLC
- Representative: Chaorong Zhuang
- Product/Service: ESP Pump , Electric Petroleum Submerged Pump Unit , Gas Separator , Water Injection Pump , Impeller and Diffuser , Spare parts for Oil and Gas
- Capital (Million US $): 83,580,000RMB
- Year Established: 1996
- Total Annual Sales Volume (Million US $): Above US$100 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): Above US$100 Million
- No. of Production Lines: 10
- No. of R&D Staff: 51 -60 People
- No. of QC Staff: 51 -60 People
- OEM Services Provided: no
- Factory Size (Sq.meters): Above 100,000 square meters
- Factory Location: No. 3, nine weft Road, economic development zone, Ninghe County, Tianjin
- Contact Person: Mr. Yu zhen hua
- Tel: 86-022-58957083
Premium Related Products